Anycubic PLA Galaxy Filament 1kg - Green

Iridescent starry finish | Standard PLA print settings | Micro-sparkle, shedding-free surface | 1 kg spool | Compatible with 0.4 mm nozzles and above

The Anycubic PLA Galaxy Filament is designed for makers who want their 3D prints to stand out with a striking, iridescent metallic finish. Infused with micro-sparkle powders, this 1 kg spool delivers a refined starry effect that shifts appearance with every angle — ideal for decorative parts, figurines, and art pieces where visual impact matters. It uses standard PLA print settings, so there is no need to dial in exotic parameters: simply load, print, and enjoy consistent, reliable results. The premium raw materials ensure excellent sparkle powder adhesion, giving your finished models a durable, shedding-free surface that holds its lustre over time. At a recommended printing speed of 40–260 mm/s, a nozzle temperature of 200–230 °C, and a heated bed temperature of 60–65 °C, PLA Galaxy slots comfortably into your existing FDM workflow.

Features

• Iridescent finish that reveals shifting colours from different angles — ideal for decorative models and art pieces
• Micro-sparkle powder formula creates a refined starry, metallic effect that conceals layer lines
• Premium adhesion engineering ensures a shedding-free, durable sparkle finish that lasts
• Uses standard PLA print settings — beginner-friendly, plug-and-play experience
• Intelligent identification chip support for seamless automatic filament recognition on compatible Anycubic printers
• Compatible reusable spool system with threaded connection to reduce entanglement and filament scatter
• Dry out before use recommended: 55–60 °C for 6–8 hours for best results

Specifications

• Colour: Galaxy Green (#4E5B31)
• Dry Out Before Use: Recommended
• Drying Condition: 55-60 ℃, 6-8 h
• ACE Compatibility: Compatible
• Nozzle Size: Recommended 0.4 mm or above
• Printing Temperature: 200-230 ℃
• Heated Bed Temperature: 60-65 ℃
• Recommended Printing Speed: 40-260 mm/s
• Cooling Time: 10 s
• Maximum Volume Speed (Flow Rate): 12 mm³/s
• Density: 1.23 g/cm³
• Melt Index: 5.85 g/10 min (190℃/2.16kg)
• Melting Point Temperature: 156 ℃
• Vicat Softening Temperature: 56 ℃
• Heat Deflection Temperature (0.45MPa): 53 ℃
• Young's Modulus: 3500±300 MPa
• Elongation at Break: 12±2%
• Bending Modulus: 3500±200 MPa
• Bending Strength: 95±2 MPa
• lzod lmpact Strength (X-Y): 25±3 kJ/m²
• Tensile Strength (Z): 36±1 MPa
• Filament Type: Aesthetic filaments
• Recommend to Print: Decorative parts, artworks
• Intelligent Identification: Supported
• Reusable Filament Spool: Supported
• Size: 1KG

What's in the Box

• Anycubic PLA Galaxy Filament 1kg - Green x1